How To Fix The Loose Glass Door Handle?

Here is a Fittings For Tempered Glass Factory talking about how to fix the loose glass door handle.

If you need information about Toughened Glass Door Handle, feel free to contact us.

C Shape Stainless Steel Door Handle

The glass door has been used for a long time. I found that the door handle was delivered. How to fix the glass door handle? Some users will directly find the professional master to replace the door panel, but some users will find a way to solve the door handle problem. But there are also users who have thought about the experience, and put forward good advice to help you repair the door handle. Let's take a look at the glass handle installation method.

First, how to repair the glass door handle

Glass door handle maintenance should also consider different degrees of damage, and then the right medicine. For example, the glass door handle is loose, which is generally the deviation that occurs when the glass is cut. It can be wrapped directly with soft tape, and then fixed. In addition, a small amount of glass glue can be added before installation, or when the handle is assembled, tighten the fixing screw after close to the glass, so that the handle can be completely ensured. Will be loose.

Second, the glass door handle installation method

1, punching

On the all-glass door leaf, the glass door should be punched. The punching of the glass door is usually done when cutting the glass. The hole used by the glass door handle should be small-point and then slowly When the handle is installed, it is slightly loose, which is the best. Don't be too loose, otherwise the door handle is not easy to be firm.

2, glue

Before installing the door handle, apply a suitable glass glue around the part of the door handle that penetrates the glass.

3, fixed

Wrap the insertion part of the door handle with a soft tape to facilitate the fixing of the handle. Then assemble the handle so that the root of the door handle is tightly attached to the glass and then tighten the fixing screw to ensure that the handle is not loose.

4, processing

If it is not glass tempered glass, use a 10mm glass drill bit to measure the hole distance of the glass door handle, mark it on the glass door, water the hole, and install it from the outside, and screw the long screw inside. Leave the screw of the handle outside, so that the glass handle can be removed from the outside.

We have C Shape Stainless Steel Door Handle. If you want to learn more about the product, welcome to follow our website.